Products Distributors Contact Links Videos Frequently asked questions
 
Tools
back
kwikee

KWIK KEE

Quick Rekey Alike Device

Most businesses or residences have under 10 cylinder changes. When keying them, you may have made piles of pins on your work area, used a loading tray or just picked from your pin kit...then proceeded to load each chamber in the same order, over and over again. With KWIK KEE you can load once and rekey your cylinders in a flash.

Come with bibles for:

  • Kwikset spaceing
  • Schlage spaceing

Special order just about any other manufacturers spacing bible separately.

This device will hold up to 15 Schlage #9 pins.

Spring loaded follower allows for one handed operation.

Magnetically holds itself onto your work area.

Change out the follower when rekeying specialized cylinders.

 

See video coverage of the KWIK KEE at the

ALOA Convention 2012 - Las Vegas

CLICK HERE

KWIK KEE
USB-WR

USB WAFER READER

Ready to read wafers in the 21st Century?

This digital camera system has probes that allow you to push down on the wafers and take snap shots of each as they pop up inside the lock. Then go to the image folder and compare the photos to figure out the key cuts.

* Adjustable light source.

* 2 easily changeable probes and adjustable focus.

* Includes pdf file with a huge amount of information about the make and model cars and motorcycles that use wafers. Information like quantity of wafers, how many depths you are looking for and wafer sizes.

* Flash drive also contains 5 videos about wafer reading.

SEE OUR FEATURED VIDEO

 

USB-WR

Door Laser

Door Laser Guide For Core Drilling Doors

The Affordable & Effective Tool For Core Drilling Doors. Use of laser sight assures accurate drilling through core, to prevent damage to either face of door.

DRLSR
Flex Bits

FLEX BITS

These bits are long enough for core drilling doors, drilling at (install) sites for running wiring in walls and crawl spaces

1/4" x 24" Flex Bit FB-14X24
1/4" x 36" Flex Bit FB-14X36
1/4" x 48" Flex Bit FB-14X48
3/8" x 24" Flex Bit FB-38X24
3/8" x 36" Flex Bit FB-38X36
3/8" x 48" Flex Bit FB-38X48
Carbide bits

                Normal Drill Bit                        Carbide Tip Safe Bit

Carbide Tip Drill Bits

These Carbide Tip Drill bits are specially designed for drilling through safes, hard plate, and other demanding metal work.The longer bits, such as the 24” & 30” bits, are ideal for access control & alarm work. With their sharpened tips, designed for opening safes, they are ideal for drilling through walls and especially helpful if you should encounter any rebar!

 

Carbide Tip Safe Drill Bit 1 /2" x 24" K-12X24
Carbide Tip Safe Drill Bit 1 /2" x 4" K-12X4
Carbide Tip Safe Drill Bit 1/4" x 4" K-14X4
Carbide Tip Safe Drill Bit 1/4"x 6" K-14X6
Carbide Tip Safe Drill Bit 3/16" x 4" K-316X4
Carbide Tip Safe Drill Bit 3/16" x 6" K-316X6
Carbide Tip Safe Drill Bit 3/8" x 30" K-38X30
Carbide Tip Safe Drill Bit 3/8" x 4" K-38X4
Carbide Tip Safe Drill Bit 3/8" x 6" K-38X6
Carbide Tip Safe Drill Bit 5/16" x 13" K-516X13
Carbide Tip Safe Drill Bit 5/16" x 30" K-516X30
Carbide Tip Safe Drill Bit 5/16" x 4" K-516X4
Carbide Tip Safe Drill Bit 5/16" x 6" K-516X6
Carbide Tip Safe Drill Bit 1/2" x 13" K-B12X13
Carbide Tip Safe Drill Bit 1/4" x 13" K-14X13
Carbide Tip Safe Drill Bit 1/8" x 3" K-B18X3
Carbide Tip Safe Drill Bit 3/8 x 13" K-B38X13
Carbide Tip Safe Drill Bit 1/2" x 6" K-12X6

Gate Box Installation Jig

The Gate Box Installation Jig is a revolutionary tool, designed to make your life easier! Clamping this tool on your gate during a retrofit will align the gate edge, assist in getting perfect gate box alignment, and free your hands so you can weld safely and better than ever before! This is one tool you will NOT want to be without! Save time! Weld easier! Get a better welding seam, and keep your hands free! Get the Gate Box Installation Jig NOW!

Comes with two 6” -90 degree magnets

K-GBJ

Straight Cut Tool

Get a straight cut on all of your gate box retro fits, the first try. This great tool clamps onto gates between 1” and 2”, has a hardened steel stop and acts as a miter box for use with your reciprocating saw.

STR CUT

Safe Buster With Standard Collar

This tool is used to drill through hardplate. You can apply over 500 lbs of pressure at the drill tip with about 35 lbs. of pressure at the handle. Penetrates most hardplate in minutes instead of hours. Drill Motor Not Included.

K-14

 

Safe Buster With Milwaukee Collar

This is the same Tool as the K-14 Safe Buster (pictured above) , but the collar is designed to fit Milwaukee® Drills

K-14-MIL
K-18 Change Key Set

K-18 Change Key Set

The K-18 Change Key Set is a set of the twelve most common change keys, all in a handy case. Keys fold out “knife style” to select the proper tool. Case is engraved with description of uses.

K-18

K-GSA • GSA Type Change Key Set

The new Keedex K-GSA, GSA type change key set, is designed for those individuals working in the GSA environment. Contains the keys needed for servicing GSA rated containers. Keys are made of cast stainless steel. Case is engraved with description of uses. Made in USA.

 

K-GSA
K-19 Profile Cylinder Follower

Profile Cylinder Follower

This segmented follower is a simple but effective solution to the
frustration of servicing profile cylinders. Special magnetic design for easy operation.

K-19
K-22

Lever Opening Tool

This tool is to be sold only to locksmiths and law enforcement agencies.

This tool is not to be used unlawfully. Keedex will not be responsible for the misuse of this tool.

K-22
Lever Opening Tool (Use this Stock Number when ordering 5 or more) K-22-5+
K-23

Scope For Mini Flashlights

Transforms your mini-flashlight into a powerful inspection device. Works with Mini-Mag Lite®, Brinkman® and many other "AA" flashlights.

The K-23 consists of a 1" diameter polypropylene cap and two interchangeable, fiber optic rods, one 45° and one 90°.

K-23
K-4

G.M. Decoder

Decodes all tumblers in one step without complete disassembly of the lock. Pick sidebar down. Press the K-4 firmly into the six chambers of the lock. Read cuts with gauge provided. Made of Lexan. Guaranteed for life. Stainless steel fingers. Durable aluminum card. Instructions and case included.

K-4
K-5 Speedo II 12v. DC Motor

SPEEDO II 12v. DC MOTOR

3800 R.P.M. high torque reversible 12 volt D.C. motor. This motor is engineered to work with a wide variety of key machines. The K-5 even out performs more expensive motors. Energy efficient permanent magnet design. Reversing power leads, allows you to reverse shaft rotation. Motor is capable of a full 1/4 h.p. Bronze bearings. Comes with pulley, mounting bracket and belt. Guaranteed for one year.

K-5
K-6 Master Follower

Master Follower

This remarkable follower is a wise choice for either the newcomer or master locksmith. Made of solid brass, it will out last those made of plastic or aluminum. The capabilities of this machined follower far exceed any follower on the market today. It can be used as a regular follower, or as a master pin remover and follower on Schlage, Sargent, Kwikset, Weiser, Almont padlocks and many others. Special taper allows smooth operation and better control over sticking pins.

K-6
K-6-COR Master Follower- Corbin Russwin Combo (.500 & .550 plugs) Follower
Master Follower- Corbin Russwin Combo (.500 & .550 plugs) Follower K-6-COR
K-DTW Double Tension Wrench

Double Tension Wrench

This wrench has 2 different widths to accommodate different keyways and is made of quality steel to grip right for maximum control while picking

K-DTW
K-EZR Herculite Reflective Screwdriver

Herculite Reflective Screwdriver

The K-EZR is designed to slide under a herculite door so you can service the cylinder without having to remove the door. Once placed under the door you can view the set-screw with its' reflective surface, you then turn the sprocket, loosing the set-screw. With the sprocket design there is no need to disconnect from the set-screw which saves you time.

Interchangable slotted and allen head tips are provided.

K-EZR
K-GSA - GSA Type Change Key Set

GSA Type Change Key Set

The new Keedex K-GSA, GSA type change key set, is designed for those individuals working in the GSA environment. Contains the keys needed for servicing GSA rated containers. Key are made of cast stainless steel. Case is engraved with description of uses. Made in USA.

K-GSA
K-TMPA/R Installation Template Adams Rite 1850S, 4530, 4710, & 4711

Installation Template Adams Rite 1850S, 4530, 4710, & 4711

This tool allows you to make precise installation of Adams Rite 1850S, 4530, 4710 & 4711 series locks. Also works with the International DH 1822 & DL4511. Covers the following backsets: 7/8", 31/32" & 1 1/8".

 

K-TMPA/R

Page 17

K-TMPDOR Installation Template Dor-O-Matic 990/1990 & 1090/ 2090

Installation Template Dor-O-Matic 990/1990 & 1090/ 2090

This tool allows you to make precise installation of DOR-O-MATIC®
990/1990 & 1090/2090 SERIES EXIT DEVICES.

K-TMPDOR
LIT-M Moonlight

Fiber-Optic Moonlight for Mini MagLite

The Keedex Moonlight attaches to any Mini-Maglite flashlight and is designed to fit into a 1/4” opening for viewing inside of a drilled hole. By inserting the Moonlight into the hole it lights up the inside (of a safe) using 11 fiber-optic elements. The crescent shape “moon” design covers only 20% of the viewing area allowing an 80% non-obstructed view inside the hole with a high-intensity light beam.

LIT-M
SPIN - Spin Out Mortise Cylinder Screwdriver

Spin Out Mortise Cylinder Screwdriver

How many times have you struggled, trying to remove the cam screws on mortise cylinders? The Spin Out is specially designed to remove even the most stubborn screws.

The “Spin Out” features a screwdriver with an oversized handle for extra torque. Four sizes of interchangeable screwdriver bits – two slotted and two Phillips.

Includes stand, with bronze bearing, to prevent the screwdriver from slipping. Allows you to provide constant, even pressure to the screws.

  •Prevents injuries to you and your employees hands, caused by a screwdriver slipping.

 •Prevents stripped out screw heads.

 •Allows you to remove even the most stubborn screws.

SPIN
SSKIT Spanner Screw Kit Screw

Tamper Resistant Stainless Steel Spanner Screw Kit

Contains 12 each, of each of the following 14 different sizes of machine and wood/metal Tamper Resistant stainless steel screws, specifically suited to the needs of locksmiths.

SSKIT
Tamper Resistant Screw Driver

Tamper Resistant Screwdriver

Keedex has a new Tamper Resistant Screwdriver Automotive Work,Access Control, Commercial & Institutional Locksmithing. This screwdriver comes with eleven interchangeable tips. Includes the following:

 Six tamper resistant torx tips (T10, T15, T20, T25, T27 & T30).

 Three tamper resistant hex tips (5/32", 3/16" & 7/32").

 Two Spanner Tips (#6 & #8).

 

All tips fit into the screwdriver's storage handle.

TAMPER
U-Hold Universal Scope Holder

Universal Scope Holder

The U-HOLD is made with a strong 2”diameter
magnet that attaches to safes and other metal
surfaces, dual pivoting arms for thousands of
positioning possibilities, and a clip that will hold
a scope or other tools, without damaging
the scope or tool.

U-HOLD

WRR-33
Wire Running Rods

These nonconductive fiberglass rods can be screwed together to form longer lengths for running through walls, attics, crawl spaces, sub-floors, and suspended ceilings.

Kit includes

•(10) 39” rods with threaded
brass connectors,

•A 6-1/2” flexible acrylic
connection that can be set to any angle,

•A brass hook end for pulling,

•And a brass eye end for pushing.

Can be extended up to 33 feet!

Whisk Head for the WRR-33 Wire Running Rods

WRR-W

V hook for the WRR-33 Wire Running Rods

WRR-V