Finally an easier way to manipulate a safe. One of the difficult things in safe manipulation is detaining 1/10 of a number difference between numbers. Keedex has found a solution. By using a miniature line laser that attaches to the safe dial and using targets that can go 6″, 12″, and 18″ inches it makes it very easy to determine 1/10 of a number variation between numbers. The kit comes with laser unit, six targets, magnetic angle bracket to hold targets, glue gun, extra glue, and extra batterie.






USB Scope Viewer

Turn your boresope into a digital viewing system!

Connect your borescope eyepiece to your borescope, then connect to computer via USB, or Android tablet / phone with suppled micro USB adapter. This will allow you to view full digital color screen. We have free software and we also have a third-party software we recommend if you want extra features but you would have to purchase. That allows you to zoom in, correct a mirror image if you are using a mirror tube, make views to document your work or collaborate with a colleague for evaluation over the internet or via SKIPE. Take a snapshot for further study. Manual focus allows you to adjust focal length from the distal end of your scope. Additional features come with on board adjustable LED light source.

This system works with all borescopes made after 1996, including the most commonly used by safemen… Hawkeye, Olympus, Storz, and Wolf to name a few. Made of soft nylon and its light weight (2.5 ounces) assures that the placement on your expensive scope won’t damage it. The USB-SV uses low light technology which eliminates the need for an expensive light generator – saving you thousands more.

Software Information


Smart Phone Viewer


Use your borescope with your smart phone. A simple device that attaches to your borescope and your smartphone, then by launching your camera allows enhanced viewing. No more squinting through a small eye piece. Take photos to diagnose and aid with technical support.







Spindle Marking Tool

The Spindle marking tool is designed to take the hassle out of marking the spindle to cut to the right length.






Emergency Transfer Dial

The Keedex K-ETD Emergency Transfer Dial is an efficient tool designed to attach to the safe in a manner in witch not to obscure the view of the internal lock after penetration of the safe for the opening, thus allowing viewing and dialing at the same time. The transfer dial has two moveable indexes to facilitate the transfer of combination numbers.







Carbide Tip Drill Bits

These Carbide Tip Drill bits are specially designed for drilling through safes, hard plate, and other demanding metal work.The longer bits, such as the 24” & 30” bits, are ideal for access control & alarm work. With their sharpened tips, designed for opening safes, they are ideal for drilling through walls and especially helpful if you should encounter any rebar!

Carbide Tip Safe Drill Bit 1 /2″ x 24″      K-12X24
Carbide Tip Safe Drill Bit 1 /2″ x 4″        K-12X4
Carbide Tip Safe Drill Bit 1/4″ x 4″         K-14X4
Carbide Tip Safe Drill Bit 1/4″x 6″          K-14X6
Carbide Tip Safe Drill Bit 3/16″ x 4″       K-316X4
Carbide Tip Safe Drill Bit 3/16″ x 6″       K-316X6
Carbide Tip Safe Drill Bit 3/8″ x 30″       K-38X30
Carbide Tip Safe Drill Bit 3/8″ x 4″          K-38X4
Carbide Tip Safe Drill Bit 3/8″ x 6″          K-38X6
Carbide Tip Safe Drill Bit 5/16″ x 13″     K-516X13
Carbide Tip Safe Drill Bit 5/16″ x 30″     K-516X30
Carbide Tip Safe Drill Bit 5/16″ x 4″       K-516X4
Carbide Tip Safe Drill Bit 5/16″ x 6″       K-516X6
Carbide Tip Safe Drill Bit 1/2″ x 13″       K-B12X13
Carbide Tip Safe Drill Bit 1/4″ x 13″       K-14X13
Carbide Tip Safe Drill Bit 1/8″ x 3″         K-B18X3
Carbide Tip Safe Drill Bit 3/8 x 13″        K-B38X13
Carbide Tip Safe Drill Bit 1/2″ x 6″         K-12X6





Carnide Tip Drill Bits

Fiber Optic Moonlight for Mini-MagLite

The Keedex Moonlight attaches to any Mini-Maglite flashlight and is designed to fit into a 1/4” opening for viewing inside of a drilled hole. By inserting the Moonlight into the hole it lights up the inside (of a safe) using 11 fiber-optic elements. The crescent shape “moon” design covers only 20% of the viewing area allowing an 80% non-obstructed view inside the hole with a high-intensity light beam.

The stronger your light source the brighter the Moonlight. Maglite makes 1 and 3 watt bulbs. We highly suggest the 3-watt LED flashlight Maglite features a fast-focus beam that adjusts from spot-to-flood, use the spot light focus.
The Moonlight needs no batteries and has no light bulbs to break. It is made of a highly researched flexible tubing which uses over 22 feet of fiber-optic cable.






K-18 Change Key Set

How many times have you searched and searched for a particular change key at the bottom of your tool box? Keedex has the solution. The K-18 Change Key Set is a set of the twelve most common change keys, all in a handy case. Keys fold out “knife style” to select the proper tool. Case is engraved with description of uses. Keys are made of stainless steel. Made in U.S.A.

K-18 parts can be found here




K-GSA • GSA Type Change Key Set

The new Keedex K-GSA, GSA type change key set, is designed for those individuals working in the GSA environment. Contains the keys needed for servicing GSA rated containers. Keys are made of cast stainless steel. Case is engraved with description of uses. Made in USA.

K-GSA parts can be found here






Universal Scope Holder

The U-HOLD is made with a strong 2”diameter 
magnet that attaches to safes and other metal
surfaces, dual pivoting arms for thousands of 
positioning possibilities, and a clip that will hold
a scope or other tools, without damaging 
the scope or tool.



Little Buddy

When You Need A Helping Hand

Flexable Octopod Design

Interchangable Heads – Clip or Cradle

Overall length 8″ with Clip Head

Extremely Strong Rare Earth Magnets hold firmly onto metal

35 Moving Parts

Connecting Beads can be rearranged – unlimited applications!


K-23 Scope for Mini-Flashlights

Transform your mini-flashlight into a powerful inspection device. Works with Mini-Mag Light®, Brinkman® and many other”AA” flashlights.

The K-23 consists of a 1″ diameter polypropylene cap and two interchangeable, fiber optic rods, one 45′ and one 90′


Safe Buster With Standard Collar

This tool is used to drill through hardplate. You can apply over 500 lbs of pressure at the drill tip with about 35 lbs. of pressure at the handle. Penetrates most hardplate in minutes instead of hours. Drill Motor Not Included.



Safe Repair Kit

Developed specifically for locksmiths and safemen, these steel taper pins and corresponding ball bearings will prove invaluable when repairing safes that have been drilled open.

Five sizes of taper pins milled from bar steel to help you repair drill holes from 1/8″ to 1/2″. Four sizes of corresponding ball bearings to complete a professional repair. Reorder numbers included. Made in the U.S.A.

K-16 parts can be found here




Roll Pin Kit

Contains an assortment of the zinc plated roll pins most commonly used by locksmiths.

Includes sizes 1/16 thru 5/32″ in diameter and 3/8 thru 1 1/2″ in length. 18 different sizes. 480 pins total. All packed in a durable, 18 compartment plastic box. Re-order numbers included. Made in the U.S.A.

K-RP Replacement parts can be found here







Metric Plus Roll Pin Kit

Contains an assortment of metric and fractional roll pins.

Metric sizes: 1.5mm x 18mm and the following sizes in 26mm.

length: 2mm, 2.5mm, 3mm, 4mm, 4.5mm, 5mm, 6mm & 8mm

Fractional sizes: 1″ Lengths of the following sizes:1/16″, 5/64″, 3/32″, 1/8″, 5/32″, 3/16″, 7/32″, 1/4″& 5/16″.

Quantity: 12ea of the above sizes. 216 pins total. Re-order numbers included.

Made in USA

K-RP-M Replacement parts can be found here






Magnetic Transfer Index for K-ETD (1 Magnet, 1 Index)